Sold: A used Boley Leinen A1L ø8mm Backgeared and Screwcutting Lathe with Accessories 

For professional use in watchmaker's workshop, in the precision engineering industries, in the optical production as well as in laboratories, schools, etc.

- Lathe on heavy base, Bed length 500, Center height 60mm, Tip distance 250mm, Spindle bore 8mm
- Motor 230V, 200W with stepless speed control and right and left rotation
- 3 Jaw chuck with 8mm shaft
- Follower rest
- Automatic feed and crewcutting with set of Changewheels
- Compound slide rest for lengthways, flat and conical turning
- Crank tailstock with live and hollow centres
- Drilling tailstock with adjustable sliding sleeve and drawbar for collets 8mm
- Sleeve tailstock
- Universal sleeve set / runner:
    - 1 centring and drilling sleeve
    - 3 collets
    - 1 collet holder of 5.5 mm
    - 1 drawbar
    - 1 disc with 8 hollows
    - 1 centering disc
- Set of countersinkers 24 pieces
- Journal bearing roller disc
- Hand-rest with T-rest
- Double roller rest height adjustable
- Small saw table
- Collet set 32 pieces with ø8mm shaft 0.3-0.4-0.5-0.6-0.7-0.8-0.9-1-1.2-1.4-1.6-1.8-2-2.2-2.4-2.6-2.8-3-3.2-3.4-3.6-3.8-4-4-4.2-4.4-4.6-4.8-5-5.2-5.4-6mm
- Set of step chucks
- Set of ring chucks
- Live and Hollow centre collets with shaft 8mm
- Combinid pulley runner
- Screwed arbor with conical wood thread holding brushes, polishing bobs- Eight screw chuck
- Shellac chuck large
- Crown chuck 10mm
- 2 pieces carrier plate
- Face plate with taped holes and 8mm shaft
- Adapter backplate for 3 Jaw chuck
- Toolholders for round and square
- Vertical slight rest with a scaled disc
- Milling and grinding spindle 8mm with drawbar
- Indexing and dividing head with 10 dividing circles (90, 84, 80, 72, 70, 68, 64, 60, 54, 50).
- 3 Pieces of arbor for sawblades and mills
- Sawblades 9 pieces: Ø 30 x 0.2/0,3/0.4/0.5/0.6/0.7/0.8/0.9 and 1 mm 

Weight 83Kg (accessories 20Kg, motor switch and condesor 30Kg, lathe and baseplate 33Kg)