Sold: Schaublin 70 High Precision Lathe with accessories

Sold: A used Schaublin 70 High Precision Lathe with accessories

All parts of this set are never been used or almost never been used

Including:

70-12	Bed
70-31	Headstock W12 Dicht model motor onder
70-32.030	Drawbar
70-65	Tailstock
70-45	Cross slide
70-46.010	Toolpost
70-96.100	Motor 750/1500rpm
	Frequency controller, potentiometer and emergency stop 230V
70-87.510	Vice
70-87.350	Milling attachment
70-95.120	Endless belt
70-95.100	Belt-tensioning attachment
70-95.222	Motor pulley
70-33.500	Handwheeel
70-25.064	3- Jaw chuck W12 2x3 Jaws Pratt Burnerd
70-25.180	Protection nut
70-46.200	Multifix toolholder base
70-46.220	Toolholder square
70-46.230	Toolholder round
70-46.250	Cutting off holder
70-46.255	Cutting-off blade
70-21.800	Dividing attachment for W12 w. 4 perf. Discs
70-25.080	6 jaw chuck interna land external 2x6 jaws
70-74.041	Gepy male center 60˚
70-25.110	Faceplate with T-slots (without clamps)
70-20160	Raised clamps
70-30.225	Adjustable dept stop W12 for fitting in collet
70-87.550	Grinding attachment B6
70-87.700	Grinding arbor B6 ø10mm
70-87.300	Circular base for grinding spindle on vertical slide
70-89.050	3-Jaw steady
70-74.100	Drill chuck with arbor 2 degrees
80-00002D	8x Collet W12 Ø 0.3-0.9 by 0.1 mm
80-00002D-	10x Collet W12 Ø 1-1.9 by 0.1 mm
80-00002D--	11x Collet W12 Ø 2-3 by 0.1 mm
80-00002D---	61x Collet W12 Ø 4-12 by 0.1 mm
70-74.001	Male center 2˚
70-74.021	Female center 2˚
70-74.031	Half female center 2˚
70-25.001	Male center W12
70-25.005	Female center W12
70-25.279	Centre-holding bush W12/2˚
70-25.095	Drive plate
0102-20131	Driving dog for Ø6.5mm
0102-20132	Driving dog for Ø8mm
70-91	Hand rest
70-91.120	Sawing table
70-83.013	Chip tray
70-46.070	Slide stop
	Lubrication pump

Weight 90Kg

Contact