Verkauft: Schaublin 70 Hochpräzisions Drehbank mit Zubehör
Verkauft: Eine gebrauchte Schaublin 70 Hochpräzisions Drehbank mit Zubehör
Alle Teile dieses Satz sind nie benutzt worden oder fast nie benutzt worden.
Mit:
| 70-12 | Bed |
| 70-31 | Headstock W12 Dicht model motor onder |
| 70-32.030 | Drawbar |
| 70-65 | Tailstock |
| 70-45 | Cross slide |
| 70-46.010 | Toolpost |
| 70-96.100 | Motor 750/1500rpm |
| Frequency controller, potentiometer and emergency stop 230V | |
| 70-87.510 | Vice |
| 70-87.350 | Milling attachment |
| 70-95.120 | Endless belt |
| 70-95.100 | Belt-tensioning attachment |
| 70-95.222 | Motor pulley |
| 70-33.500 | Handwheeel |
| 70-25.064 | 3- Jaw chuck W12 2x3 Jaws Pratt Burnerd |
| 70-25.180 | Protection nut |
| 70-46.200 | Multifix toolholder base |
| 70-46.220 | Toolholder square |
| 70-46.230 | Toolholder round |
| 70-46.250 | Cutting off holder |
| 70-46.255 | Cutting-off blade |
| 70-21.800 | Dividing attachment for W12 w. 4 perf. Discs |
| 70-25.080 | 6 jaw chuck interna land external 2x6 jaws |
| 70-74.041 | Gepy male center 60˚ |
| 70-25.110 | Faceplate with T-slots (without clamps) |
| 70-20160 | Raised clamps |
| 70-30.225 | Adjustable dept stop W12 for fitting in collet |
| 70-87.550 | Grinding attachment B6 |
| 70-87.700 | Grinding arbor B6 ø10mm |
| 70-87.300 | Circular base for grinding spindle on vertical slide |
| 70-89.050 | 3-Jaw steady |
| 70-74.100 | Drill chuck with arbor 2 degrees |
| 80-00002D | 8x Collet W12 Ø 0.3-0.9 by 0.1 mm |
| 80-00002D- | 10x Collet W12 Ø 1-1.9 by 0.1 mm |
| 80-00002D-- | 11x Collet W12 Ø 2-3 by 0.1 mm |
| 80-00002D--- | 61x Collet W12 Ø 4-12 by 0.1 mm |
| 70-74.001 | Male center 2˚ |
| 70-74.021 | Female center 2˚ |
| 70-74.031 | Half female center 2˚ |
| 70-25.001 | Male center W12 |
| 70-25.005 | Female center W12 |
| 70-25.279 | Centre-holding bush W12/2˚ |
| 70-25.095 | Drive plate |
| 0102-20131 | Driving dog for Ø6.5mm |
| 0102-20132 | Driving dog for Ø8mm |
| 70-91 | Hand rest |
| 70-91.120 | Sawing table |
| 70-83.013 | Chip tray |
| 70-46.070 | Slide stop |
| Lubrication pump |
Gewicht 90Kg
